双螺杆压缩机CFD仿真分析及实验验证
CSTR:
作者:
作者单位:

(1. 江苏省食品先进制造装备技术重点实验室,江苏 无锡 214122;2. 江南大学机械工程学院,江苏 无锡 214122)

作者简介:

龙骥,男,江南大学在读硕士研究生。

通讯作者:

何雪明(1966—),男,江南大学教授,博士。E-mail:hxuem2003@163.com

中图分类号:

基金项目:

国家自然科学基金资助项目(编号:51275210)


CFD simulation analysis and experimental verification of twin screw compressor
Author:
Affiliation:

(1. Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu 214122, China; 2. School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu 214122, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对双螺杆压缩机流体域形状复杂并随时间变化的特点,运用STAR CCM+软件进行计算流体动力学(CFD)分析,并搭建试验平台验证分析结果的准确性。通过对比仿真监测点和与之相对应的试验实测点的压力,两者在压力值和压力波动周期等方面具有较好的一致性,验证了CFD分析结果的可信度。

    Abstract:

    In view of the complex and time changing characteristics of the fluid domain in the twin screw compressor, and in order to study it’s performance characteristics in detail, used STAR CCM+software to do the computational fluid dynamics (CFD) analysis, and the experimental platform was built to verify the accuracy of the simulation results. By comparing the pressure values of the simulated monitoring points and the experimental measured points corresponding to them, both of them have good consistency in the pressure value and the period of pressure fluctuation.

    参考文献
    相似文献
    引证文献
引用本文

龙骥,何雪明,姜振钢.双螺杆压缩机CFD仿真分析及实验验证[J].食品与机械,2018,34(9):106-110,146.
LONGJi, HEXueming, JIANGZhengang. CFD simulation analysis and experimental verification of twin screw compressor[J]. Food & Machinery,2018,34(9):106-110,146.

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-05-11
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-03-17
  • 出版日期:
文章二维码
×
《食品与机械》
友情提示
友情提示 一、 近日有不少作者反应我刊官网无法打开,是因为我刊网站正在升级,旧网站仍在百度搜索排名前列。请认准《食品与机械》唯一官方网址:http://www.ifoodmm.com/spyjx/home 唯一官方邮箱:foodmm@ifoodmm.com; 联系电话:0731-85258200,希望广大读者和作者仔细甄别。