高粱醇溶蛋白提取工艺及其功能特性研究
CSTR:
作者:
作者单位:

(辽宁大学生命科学院,辽宁 沈阳 110036)

作者简介:

刘丹,女,辽宁大学在读硕士研究生。

通讯作者:

曹向宇(1980—),男,辽宁大学教授,博士。E-mail:xycaolnu@163.com

中图分类号:

基金项目:

国家自然科学基金面上项目(编号:31770017);辽宁省农业领域青年科技创新人才培养资助计划项目(编号:2015013);辽宁省高等学校优秀人才支持计划项目(编号:LJQ2013002)


Study on the extraction technology and functional properties of gliadin from sorghum
Author:
Affiliation:

(School of Life Science, Liaoning University, Shenyang, Liaoning 110036, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过单因素和响应面试验,研究超声辅助酶法制备高粱醇溶蛋白的最佳条件;以高粱醇溶蛋白为原料,研究静置时间、温度对醇溶蛋白持油性和持水性的影响。结果表明,超声辅助酶法制备高粱醇溶蛋白的最佳条件为:加酶量1%,酶作用时间3 h,超声波作用时间19 min,乙醇浓度60%,该条件下蛋白提取率为(7.19±0.36)%;在温度35 ℃、静置时间40 min条件下时,高粱醇溶蛋白持油性和持水性最大,分别为(2.84±0.15),(2.78±0.09) g/g。

    Abstract:

    The optimum conditions for the preparation of sorghum gliadin by ultrasonic assisted enzymatic method were studied by single factor and response surface test. The effects of standing time and temperature on the oil retention and water holding capacity of gliadin were studied. The results showed that the optimum conditions were as followed: enzyme dosage 1%, enzyme action time 3 h, ultrasonic action time 19 min, ethanol concentration 60%, the maximum extraction rate under the conditions of (7.19±0.36)%. At the temperature of 35 ℃and standing time of 40 min, the maximum oil holding capacityof sorghum gliadin was (2.84±0.15) g/g and the maximum water holding capacity was (2.78±0.09) g/g.

    参考文献
    相似文献
    引证文献
引用本文

刘丹,刘剑利,王帅,等.高粱醇溶蛋白提取工艺及其功能特性研究[J].食品与机械,2017,33(11):173-178.
LIUDan, LIUJianli, WANGShuai, et al. Study on the extraction technology and functional properties of gliadin from sorghum[J]. Food & Machinery,2017,33(11):173-178.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-03-10
  • 出版日期:
文章二维码
×
《食品与机械》
友情提示
友情提示 一、 近日有不少作者反应我刊官网无法打开,是因为我刊网站正在升级,旧网站仍在百度搜索排名前列。请认准《食品与机械》唯一官方网址:http://www.ifoodmm.com/spyjx/home 唯一官方邮箱:foodmm@ifoodmm.com; 联系电话:0731-85258200,希望广大读者和作者仔细甄别。