小型红枣去核机料斗机械振动装置设计及仿真分析
CSTR:
作者:
作者单位:

(安徽农业大学工学院,安徽 合肥 230036)

作者简介:

时明明,男,安徽农业大学在读硕士研究生。

通讯作者:

中图分类号:

基金项目:

安徽农业大学研究生创新基金项目(编号:2015-41)


Design and simulation analysis of the hopper mechanical vibration device for small jujube kernel removing machine
Author:
Affiliation:

(Technology School of Anhui Agricultural University, Hefei, Anhui 230036, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了提高红枣的上料速率,使红枣能准确落入枣杯,减少空杯率,对料斗的结构进行了设计,并在料斗处采用了直线往复式的机械振动装置。利用Adams软件对振动装置进行虚拟仿真分析,表明振动装置最佳工作转速范围为250~350 r/min以及400~425 r/min,红枣的上料效率最高。验证实验结果和仿真分析基本一致。

    Abstract:

    In order to improve the feeding rate of jujube, make jujubes fall into the cups and reduce the rate of the empty cup, the structure of hopper was designed, and the linear reciprocating mechanical vibration device was adopted in the hopper. The virtual simulation analysis of the vibration device was carried out with Adams software. The result shows that the optimum operating speed range of the vibration device is 250~350 r/min and 400~425 r/min, and the feeding efficiency of jujubes is the highest at this time. Finally through the test, the results and the simulation analysis are basically consistent.

    参考文献
    相似文献
    引证文献
引用本文

时明明,周洁,金瑶,等.小型红枣去核机料斗机械振动装置设计及仿真分析[J].食品与机械,2016,32(7):76-79.
SHIMingming, ZHOUJie, JINYao, et al. Design and simulation analysis of the hopper mechanical vibration device for small jujube kernel removing machine[J]. Food & Machinery,2016,32(7):76-79.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-04-12
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-03-09
  • 出版日期:
文章二维码
×
《食品与机械》
友情提示
友情提示 一、 近日有不少作者反应我刊官网无法打开,是因为我刊网站正在升级,旧网站仍在百度搜索排名前列。请认准《食品与机械》唯一官方网址:http://www.ifoodmm.com/spyjx/home 唯一官方邮箱:foodmm@ifoodmm.com; 联系电话:0731-85258200,希望广大读者和作者仔细甄别。