杨梅核破壳设备及工艺研究
CSTR:
作者:
作者单位:

(1.湖南农业大学食品科技学院,湖南 长沙 410128;2.食品科学与生物技术湖南省重点实验室,湖南 长沙 410128)

作者简介:

黄亚芳(1989-),女,湖南农业大学在读硕士研究生。E-mail:279272649@qq.com

通讯作者:

中图分类号:

基金项目:


Research on shell-cracking equipment and it's working parameter
Author:
Affiliation:

(1. College of Food Science & Technology, Hunan Agricultural University, Changsha, Hunan 410128, China; 2. Hunan Provincial Key Laboratory of Food Science and Biotechnology, Changsha, Hunan 410128, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对杨梅核的破壳设备及工艺进行研究。使用自行设计的齿型对辊破壳机进行破壳工艺优化试验,试验结果表明,杨梅核的最佳破壳条件为:对辊机破壳转速120 r/min;一级杨梅核采用的破壳辊间距为6.5 mm,其破壳率可达9875%,实际得仁率为11.62%;二级杨梅核采用的破壳辊间距为3.5 mm,其破壳率可达95.98%,实际得仁率为1121%;三级杨梅核采用的破壳辊间距也为3.5 mm,其破壳率为90.80%,实际得仁率为9.91%。统计可得杨梅核总体破壳率高达96.16%,总得仁率为11.14%,即杨梅核仁的利用率可达92.83%以上。

    Abstract:

    Bayberry seed shell-cracking equipment and it's working parameters were researched. The special equipment for that was prepared, and the optimization working parameters for bayberry seed shell cracking was achieved. Those optimal parameters are as follows: the cracking rotor runs 120r/min, the cracked rate for the first level bayberry nuclear 98.75% with the roller spacing 6.5 mm, and the naked seed obtained is 11.62%; for the second level, the cracked rate is 95.98% at roller spacing 3.5 mm, and naked seed obtained is 11.21%; for the third level, the parameters are 90.80%, 3.5 mm, and 9.91%. By statistical analysis, total shell cracked rate reaches up to 96.16%, total naked seed obtained is 11.14%, and the total utilization rate for bayberry seed is 92.83%.

    参考文献
    相似文献
    引证文献
引用本文

黄亚芳,李珂,李宗军,等.杨梅核破壳设备及工艺研究[J].食品与机械,2015,31(4):97-99.
HUANGYafang, LIKe, LIZongjun, et al. Research on shell-cracking equipment and it's working parameter[J]. Food & Machinery,2015,31(4):97-99.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-03-29
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-03-30
  • 出版日期:
文章二维码
×
《食品与机械》
友情提示
友情提示 一、 近日有不少作者反应我刊官网无法打开,是因为我刊网站正在升级,旧网站仍在百度搜索排名前列。请认准《食品与机械》唯一官方网址:http://www.ifoodmm.com/spyjx/home 唯一官方邮箱:foodmm@ifoodmm.com; 联系电话:0731-85258200,希望广大读者和作者仔细甄别。